Paper / Material construction
80 g/m² semi-gloss paper · Hot-melt pressure-sensitive adhesive · 54 g/m² white glassine
- Face
- 80 g/m² semi-gloss paper
- Adhesive
- Hot-melt pressure-sensitive adhesive
- Liner
- 54 g/m² white glassine
Container surface and appearance
Balance the visible finish with the container and use context.
Appearance, container geometry, application surface, adhesive requirements, handling and printing context belong in the same material conversation.
Start with the job
Cosmetic jars, pumps and squeezable bottles
- 01
Check the container curve and how much it deforms in use.
- 02
Specify clear, white or metallic appearance and any edge or seam constraints.
- 03
Trial squeezing, wet handling and contact with the packaged formulation.
Material families to discuss
These links are starting points, not a grade recommendation. The adhesive, liner and printing process must be selected together.
Ask about Beauty & Personal CareCompare constructions
Product candidates to discuss
Compare these documented constructions as starting points for a sample trial. Suitability for the actual surface, print process and service conditions must be confirmed.
BOPP / Material construction
50 µm coated transparent BOPP · Acrylic emulsion adhesive · 30 µm transparent PET release film
- Face
- 50 µm coated transparent BOPP
- Adhesive
- Acrylic emulsion adhesive
- Liner
- 30 µm transparent PET release film
Decision snapshot
Selecting Beauty & Personal Care
Carry forwardContainer material, geometry and surface
Confirm before selectionExact construction, application conditions and representative evidence
Material direction
Beauty & Personal Care
Appearance, container geometry, application surface, adhesive requirements, handling and printing context belong in the same material conversation.
Construction and application requirements
Describe what the job asks the construction to do.
- Container material, geometry and surface
- Facestock appearance and adhesive requirements
- Application process and use environment
- Print and finishing compatibility
Sample and technical evidence
Use a representative sample and an agreed observation plan.
Category guidance cannot confirm a specific construction. Share the material direction, application surface and service conditions, adhesive requirements, and any relevant print or converting context before deciding what should be sampled.
See the sample, document and trial frameworkUseful before choosing a material
Material enquiry
Let’s talk about your label requirements.
Material family or current constructionApplication surface and service conditionsPrint and converting requirements, if relevantSample, quotation or technical advice