65 g/m² direct thermal paper · Hot-melt · 54 g/m² white glassine
- Face
- 65 g/m² direct thermal paper
- Attachment
- Hot-melt
- Liner
- 54 g/m² white glassine
14 documented constructions
Direct thermal paper
Direct thermal paper produces an image without a ribbon. The print method is shared across this series, but paper weight, coating, adhesive and liner differ. Start with your printer and the time the barcode must remain readable, then select attachment for the actual carton or pack.
Scroll sideways to compare all columns →
| Decision | Examples in this range | Selection question |
|---|---|---|
| Paper weight | 65, 70 and 75 g/m² constructions | Which construction feeds and prints correctly on the intended equipment? |
| Adhesive | Hot-melt, freezer hot-melt and permanent acrylic emulsion | At what temperature and on which surface is the label applied? |
| Liner | White or yellow glassine; construction-specific weights | Does the complete roll work with the sensor, die and dispenser? |
Match the barcode job before choosing a paper weight
Record the printer model, direct thermal mode, speed and energy setting. A heavier paper is not automatically a longer-life image. Define heat, light, rubbing and the intended reading period separately; retain a printed control for the exposure trial.
- Use the intended barcode size and receiving scanner or agreed verification method.
- Record roll width, core, winding and outside diameter.
- Check the image after handling and storage, not only at the printer.
Keep freezer attachment separate from thermal imaging
The documented thermal-paper range includes freezer hot-melt with white glassine and standard hot-melt with yellow glassine. Neither construction establishes a minimum application temperature, attachment to frost or a guaranteed barcode life. Compare the complete face, adhesive and liner before choosing a trial.
- State application-surface temperature and the later storage cycle.
- Check condensation, edge lift and image changes as separate observations.
- Ask for the current construction specification before scheduling the trial.
Face / attachment / backing
Compare 14 documented constructions
These records identify nominal constructions, not current stock or a printer approval. Check the current specification and sample format with RT.
65 g/m² direct thermal paper · Hot-melt · 58 g/m² yellow glassine
- Face
- 65 g/m² direct thermal paper
- Attachment
- Hot-melt
- Liner
- 58 g/m² yellow glassine
70 g/m² top direct thermal paper · Hot-melt · 54 g/m² white glassine liner
- Face
- 70 g/m² top direct thermal paper
- Attachment
- Hot-melt
- Liner
- 54 g/m² white glassine liner
70 g/m² top-coated direct thermal paper · Permanent acrylic emulsion · 54 g/m² white glassine
- Face
- 70 g/m² top-coated direct thermal paper
- Attachment
- Permanent acrylic emulsion
- Liner
- 54 g/m² white glassine
76 g/m² direct thermal paper · Hot-melt · Linerless
- Face
- 76 g/m² direct thermal paper
- Attachment
- Hot-melt
- Liner
- Linerless
70 g/m² direct thermal paper (printed in blue) · High-tack acrylic emulsion · 60 g/m² white glassine liner
- Face
- 70 g/m² direct thermal paper (printed in blue)
- Attachment
- High-tack acrylic emulsion
- Liner
- 60 g/m² white glassine liner
70 g/m² direct thermal paper · Hot-melt · 54 g/m² white glassine
- Face
- 70 g/m² direct thermal paper
- Attachment
- Hot-melt
- Liner
- 54 g/m² white glassine
70 g/m² direct thermal paper · Hot-melt · 60 g/m² yellow glassine
- Face
- 70 g/m² direct thermal paper
- Attachment
- Hot-melt
- Liner
- 60 g/m² yellow glassine
70 g/m² direct thermal paper · Freezer hot-melt · 54 g/m² white glassine
- Face
- 70 g/m² direct thermal paper
- Attachment
- Freezer hot-melt
- Liner
- 54 g/m² white glassine
70 g/m² top direct thermal paper · Hot-melt · 58 g/m² yellow glassine liner
- Face
- 70 g/m² top direct thermal paper
- Attachment
- Hot-melt
- Liner
- 58 g/m² yellow glassine liner
75 g/m² direct thermal paper · Hot-melt · 54 g/m² white glassine
- Face
- 75 g/m² direct thermal paper
- Attachment
- Hot-melt
- Liner
- 54 g/m² white glassine
75 g/m² direct thermal paper · Hot-melt · 60 g/m² yellow glassine
- Face
- 75 g/m² direct thermal paper
- Attachment
- Hot-melt
- Liner
- 60 g/m² yellow glassine
75 g/m² direct thermal paper · Freezer hot-melt · 54 g/m² white glassine
- Face
- 75 g/m² direct thermal paper
- Attachment
- Freezer hot-melt
- Liner
- 54 g/m² white glassine
75 g/m² top direct thermal paper · Rubber-based freezer · 58 g/m² yellow glassine liner
- Face
- 75 g/m² top direct thermal paper
- Attachment
- Rubber-based freezer
- Liner
- 58 g/m² yellow glassine liner
Sources and scope
Construction rows are transcribed from company technical records. The process checks are preparation guidance, not completed performance tests or equipment certification.