RT / Polyester label materials
Clear PET self-adhesive labelstock.
Transparent polyester label materials for printers and converters. Start with the print surface, then compare face thickness, adhesive and release liner.
Transparent polyester / Aqueous inkjet
Clear PET for water-based inkjet.
Compare 50 µm and 80 µm transparent PET faces with permanent acrylic emulsion adhesive. The 80 µm face has glassine and release-paper options. Choose the complete construction for your trial.
50 µm transparent PET film with inkjet coating
| Adhesive | Release liner | Next step |
|---|---|---|
| Permanent acrylic emulsion | 80 g/m² white glassine release paper | Request sample →Get quote → |
80 µm inkjet transparent PET film
| Adhesive | Release liner | Next step |
|---|---|---|
| Permanent acrylic emulsion | 80 g/m² white glassine liner | Request sample →Get quote → |
| Permanent acrylic emulsion | 95 g/m² white release paper | Request sample →Get quote → |
Nominal specifications, not guaranteed tolerances. Confirm your printer model, pigment or dye ink and drying settings before selecting a sample. A water-based adhesive is not the same as a water-based-inkjet print surface.
Source cautions for these three constructions: their TDS records do not recommend use on low-surface-energy materials such as PP/PE, or irregular and rough surfaces such as cartons or frosted glass. Curved surfaces with a diameter of less than 50 mm require testing before use. Ask RT to review the current TDS for the exact offered construction and labelled surface.
What matters on your label job?
- 50 µm or 80 µm?
- Compare the actual constructions on your converting and dispensing setup. Face thickness alone does not establish stiffness, durability or printer compatibility.
- Glassine or release paper?
- The two 80 µm options have different liners. Include your die-cutting, winding and dispensing requirements when requesting a sample.
- A clear label on a bottle or pack?
- Check the printed sample on the actual surface and filled container. Share the artwork, white-ink needs and expected water or handling exposure; clear film alone is not a waterproof-print claim.
- Preparing a quote?
- Send the selected construction, required roll or sheet format, width, quantity and destination if known. RT will confirm the available format and current specification with you.
Not printing with water-based ink?
These clear PET constructions have separate print-process descriptions. They are not substitutes for the inkjet-coated range above; confirm your press and ink or toner in a sample trial.
Flexographic / conventional clear PET
50 µm transparent PET film with coating
| Adhesive | Release liner | Next step |
|---|---|---|
| Permanent acrylic emulsion | 60 g/m² white glassine liner | Request sample →Get quote → |
Clear PET for laser / dry toner
50 µm transparent PET film for laser printing
| Adhesive | Release liner | Next step |
|---|---|---|
| Permanent acrylic emulsion | 135 g/m² white liner | Request sample →Get quote → |
Another print process or label face?
Consistency first
The material you approve.
The reference for your next order.
Our focus is film thickness, adhesion and release consistency, with agreed specifications as the reference for repeat orders.
The full construction matters: the face you print, the adhesive on the pack and the liner through converting. Compare samples on that basis—not the film name alone.
Quality from sample to repeat order →- Film & surface
- Consistent appearance starts with the same face specification and print surface.
- Adhesion
- The adhesive matters as much as the film when a label has to stay on the pack.
- Release & converting
- The liner is part of die-cutting, matrix removal and label dispensing—not just backing paper.